BuildSubmarines.com
Key Job
Responsibilities:
Conduct inspections to ensure compliance and conformance with project or contract specificationsConduct inspections in accordance with Quality Control PlanConduct inspections to ensure adherence to applicable legal requirementsConfer with Quality Assurance, Manager as appropriateRead blueprints and specificationsMonitor operations to ensure that they meet specificationsRecommend adjustments to the assembly or installation processInspect, identify, and submitmaterial, components, or products for testing and measurementOperate electronic inspection equipment and softwareDocument approval or rejection of inspected material, components, or productsIdentify for removal all components, products and materials that fail to meet specificationsReport inspection and test data and quantities inspectedParticipate in the Preparatory Meeting for each definable feature of work to review pertinent sections of the plans and specs requirements with the foreman supervising the work.
Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measuresParticipate in Follow-up Inspections continuously to insure professional workmanship, quality and safety in accordance with contract documents.
Perform inspections on all work performed in detail, efficiently, and in conjunction with Owner/QC.
Collect data, analyze for continuous improvement, and share with project team weekly.
Participate in the daily Operational Risk Management (ORM) meetings ensuring Quality items/issues for the scope of the work are discussed and present at least 2-3 quality tips of the day relevant to the scope of work.
Document daily QC reportsUnderstandi and follow all applicable quality system procedures, performing all assigned responsibilities outlined in the QMS.
Perform Receiving (REC), First Article (FAI), In-Process (IP) and Final Inspections (FI) on electrical and mechanical assemblies visually and/or with inspection equipment.
Immediately notify operators, or supervision of any non-conformances in productsPerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.
)Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products.
Assist in the training of operators and provide guidance.
Assist in the problem-solving process.
Participate in the Daily ORM work briefings to represent the Quality Portion.
Assist in root cause, corrective and preventive action development for systemic issues.
Advise appropriate party of any corrective action to be taken.
Coordinate with supervisor to ensure all shifts are covered appropriately in case of absence of an inspector.
Required
Qualifications:
Associates Degree in Technical Discipline (may be substituted for quality related experience)At least 6 years hands-on experience in construction, estimation, and/or quality control activities.
Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standardsExperience with receiving, production, shipping and quality processes.
Excellent communication skills (written, and verbal)Strong attention to details, highly organized and computer literate.
Ability to work well in a fast-paced manufacturing environmentAbilities:
Exposure to computer screens for an extended period of time.
Sitting for extended periods of time.
Reach by extending hands or arms in any direction.
Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard.
Listen to and understand information and ideas presented through spoken words and sentences.
Communicate information and ideas in speaking so others will understand.
Read and understand information and ideas presented in writing.
Apply general rules to specific problems to produce answers that make sense.
Identify and understand the speech of another person.
About the Company:
BuildSubmarines.
comThousands of new roles.
Fifty states.
One mission.
The Navy is on a once-in-a-generation journey to completely transform its nuclear-powered submarine fleet and maintain its critical undersea advantage.
However, this military mandate will require the addition of more than 100,000 skilled workers with the training and commitment to ensure success.
And there's not a moment to spare.
What makes a next-generation submarine? They are the largest and most technologically advanced subs the U.
S.
Navy has ever put to sea.
Nuclear powered, with the endurance to run without refueling for over 40 years.
Range? Unlimited.
These are truly futuristic marvels of design and engineering that will launch our military technology decades into the future.
We need to grow our workforce by 100,000 to meet our objective The magnitude of this mission involves the collaboration of thousands of suppliers and hundreds of thousands of hands, united to construct this modern fleet.
? No ordinary assembly line exists to piece together these giants.
This is a meticulous process, guided by visionaries and craftspeople who design, calibrate, inspect, assemble, and test every inch of these extraordinary vessels.
? And at this moment, we need more.
Company Size:
10,000 employees or moreIndustry:
Government and MilitaryFounded:
0Website:
https:
//www.
buildsubmarines.
com.
Estimated Salary: $20 to $28 per hour based on qualifications.
Responsibilities:
Conduct inspections to ensure compliance and conformance with project or contract specificationsConduct inspections in accordance with Quality Control PlanConduct inspections to ensure adherence to applicable legal requirementsConfer with Quality Assurance, Manager as appropriateRead blueprints and specificationsMonitor operations to ensure that they meet specificationsRecommend adjustments to the assembly or installation processInspect, identify, and submitmaterial, components, or products for testing and measurementOperate electronic inspection equipment and softwareDocument approval or rejection of inspected material, components, or productsIdentify for removal all components, products and materials that fail to meet specificationsReport inspection and test data and quantities inspectedParticipate in the Preparatory Meeting for each definable feature of work to review pertinent sections of the plans and specs requirements with the foreman supervising the work.
Participate in Initial Inspection to assure all required/approved materials, personnel and equipment are available, verify the site conditions, inspect the initial installation of the work and identify the required level of workmanship, quality, and safety measuresParticipate in Follow-up Inspections continuously to insure professional workmanship, quality and safety in accordance with contract documents.
Perform inspections on all work performed in detail, efficiently, and in conjunction with Owner/QC.
Collect data, analyze for continuous improvement, and share with project team weekly.
Participate in the daily Operational Risk Management (ORM) meetings ensuring Quality items/issues for the scope of the work are discussed and present at least 2-3 quality tips of the day relevant to the scope of work.
Document daily QC reportsUnderstandi and follow all applicable quality system procedures, performing all assigned responsibilities outlined in the QMS.
Perform Receiving (REC), First Article (FAI), In-Process (IP) and Final Inspections (FI) on electrical and mechanical assemblies visually and/or with inspection equipment.
Immediately notify operators, or supervision of any non-conformances in productsPerform all quality reporting requirements outlined in the MCD Quality Management System (including the inspection checklists, Data Collection Reports (PDCR), hold logs, discrepancy notices, waiver logs etc.
)Identify for segregation nonconforming units following the MCD Nonconformance procedure for prefabricated and purchased products.
Assist in the training of operators and provide guidance.
Assist in the problem-solving process.
Participate in the Daily ORM work briefings to represent the Quality Portion.
Assist in root cause, corrective and preventive action development for systemic issues.
Advise appropriate party of any corrective action to be taken.
Coordinate with supervisor to ensure all shifts are covered appropriately in case of absence of an inspector.
Required
Qualifications:
Associates Degree in Technical Discipline (may be substituted for quality related experience)At least 6 years hands-on experience in construction, estimation, and/or quality control activities.
Experience with reading and interpreting contractual requirements, drawings, BIM models, specifications, current NEC codes, NETA and other applicable standardsExperience with receiving, production, shipping and quality processes.
Excellent communication skills (written, and verbal)Strong attention to details, highly organized and computer literate.
Ability to work well in a fast-paced manufacturing environmentAbilities:
Exposure to computer screens for an extended period of time.
Sitting for extended periods of time.
Reach by extending hands or arms in any direction.
Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard.
Listen to and understand information and ideas presented through spoken words and sentences.
Communicate information and ideas in speaking so others will understand.
Read and understand information and ideas presented in writing.
Apply general rules to specific problems to produce answers that make sense.
Identify and understand the speech of another person.
About the Company:
BuildSubmarines.
comThousands of new roles.
Fifty states.
One mission.
The Navy is on a once-in-a-generation journey to completely transform its nuclear-powered submarine fleet and maintain its critical undersea advantage.
However, this military mandate will require the addition of more than 100,000 skilled workers with the training and commitment to ensure success.
And there's not a moment to spare.
What makes a next-generation submarine? They are the largest and most technologically advanced subs the U.
S.
Navy has ever put to sea.
Nuclear powered, with the endurance to run without refueling for over 40 years.
Range? Unlimited.
These are truly futuristic marvels of design and engineering that will launch our military technology decades into the future.
We need to grow our workforce by 100,000 to meet our objective The magnitude of this mission involves the collaboration of thousands of suppliers and hundreds of thousands of hands, united to construct this modern fleet.
? No ordinary assembly line exists to piece together these giants.
This is a meticulous process, guided by visionaries and craftspeople who design, calibrate, inspect, assemble, and test every inch of these extraordinary vessels.
? And at this moment, we need more.
Company Size:
10,000 employees or moreIndustry:
Government and MilitaryFounded:
0Website:
https:
//www.
buildsubmarines.
com.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
